Shenzhen Grande Electronic Linkedin Page
Shenzhen Grande Electronic Co., Ltd logo
E-mail us for a Quote:
Call us now:

Technical Article

How To Place Diodes Using Silk Screen Marks

Time:2017-06-03 17:55:33 Click:

Diodes are polarized components that must be placed on a PCB in a certain way. However, a board that has a (+) silk screen marking is not enough information to tell the assembly house how to correctly insert a diode because there are different types of diodes. 

For zener or barrier diodes, the (+) marking may or may not be the cathode of the component. Furthermore, an LED usually has a (+) anode, but not all the time.

To verify the proper way to place a diode onto a PCB, it is best to use a symbol of a diode or an indication of an anode or a cathode as per standards of the electronics industry. 

You can also use an “A” or a “C.” Ensure you also mark the PCB with a reference identifier such as D3, D4, etc. so the assemblers know it isn’t a capacitor. By making your silk screen marks clear, the PCB can be assembled on time and at the lowest cost.

Previous:How to optimize the reflow profile?

Next:How to Prevent Non-Wetting Defect during the SMT Reflow Process

Request an Official Quote



File Upload

Upload a list of files

    Please upload your Gerber files and BOM. You can upload an unlimited number of files as long as the total size of all files does not exceed 20 MB. To ensure you receive your official quote in less than 24 hours, please include the quantity of circuit boards for which you would like a quote.

    If you require that we sign a Non-Disclosure Agreement (NDA), please send it to us prior to sending your files and we will be happy to accommodate.

    Home About Us Services Quality Pb-Free News Contact Us

    Copyright ® 2017,Shenzhen Grande Electronic Co., Ltd. All Rights Reserved. English 中文站 Sitemap