Welcome to Shenzhen Grande Electronic Co., Ltd.!

Shenzhen Grande Electronic Linkedin Page

E-mail us for a Quote:
sales88@greattong.com

Call us now:
+86-755-83261869

What are the different types of electronic sensors?

2019-07-09

The sensor is generally composed of three parts: A sensing element, a conversion element and a measuring circuit; And sometimes an auxiliary power source is also added.

What do classes mean (class A, class D) with audio amplifiers?

2019-07-08

According to the different working modes of the audio amplifiers: Class A audio amplifiers: To maintain the conduction current regardless of whether the signal input or not. Class D audio amplifier: An amplification mode in which the amplification c

What is the difference between Rogers PCB and ordinary PCB?

2019-07-08

Rogers PCB: It is widely used in high frequency and high reliability fields such as microwave communication, 5G, military radar, etc.

What are the benefits of DFM (design for manufacturability)?

2019-07-05

When it comes to the benefits of DFM, cost-saving, quality-improving and delivery-shorten are a couple of considerations that we have to mention.

What's the thickest copper of flexible circuit?

2019-07-05

Actually, it mainly depends on the demands of FPC customers; Generally speaking, the most used copper thickness of flex board that is 1/2oz, 1oz, and the thickest is 2oz.

What is the future of the Internet of Things?

2019-07-04

The Internet of Things(IoT) is based on the Internet and linking things for information exchange and management. However, the huge challenge in the Internet of Things field that is Internet security.

What is a netlist in PCB?

2019-07-04

The netlist is generated by the schematic, including PRT ( components package) and NET (signal connection relationship);

What is the main circuit board of a computer? What are its functions?

2019-07-03

In fact, the main components on the mainboard are the chipset, bus, input and output interfaces and power connectors.

What is impedance control?

2019-07-03

As long as the trace on the PCB matches the file transfer rate, the signal is able to avoid interference. However, when the rate reaches 100Mhz or more, impedance control must be performed.

How are plated holes in PCBs made?

2019-07-02

1. Dipping the PCB into the sink or flushing it directly in order to allow the wall of hole to get sufficient wetting. After wetting, pay attention to that there are no bubbles in the wall of the hole; 2. Placing the PCB in the plating bath and letting

First - Previous -15 161718 19 20 21 22 23 24 - Next - End

Home About Us Services Quality Pb-Free News Contact Us

Copyright ® 2017,Shenzhen Grande Electronic Co., Ltd. All Rights Reserved. English 中文站 Sitemap