Shenzhen Grande Electronic Linkedin Page
Shenzhen Grande Electronic Co., Ltd logo
E-mail us for a Quote:
sales88@greattong.com
Call us now:
+86-755-83261869

I was told that PCB layout design was easy.Do most people find PCB layouts easy?

2019-05-15

Not really. It is quite not easy to do well in PCB layout, especially for those special products. As you probably know, PCB layout is like the bridge to undertake the schematic of design engineer and realize the product performance with the help of EDA

READ MORE

What are the advantages of using the soldering station?

2019-05-15

When it comes to the advantages of using the soldering station, there are four points we should know: a. Antistatic ( To prevent precision chip from breakdown by electrostatic during welding.) b. Dormancy( To save energy and prolong the service life

READ MORE

Can you use too much flux when soldering?

2019-05-14

No problem. There is one thing that you need concern that is cleaning the excessive flux. Here are three ways for your reference: 1.Volatilizing the excessive flux as much as possible by increasing the preheating temperature; 2.Distributing it evenly

READ MORE

How do I calculate the copper thickness of PCB?

2019-05-14

Generally, the copper thickness is calculated scientifically according to the current of PCB circuit; In addition, there is no denying that the thicker the copper, the better the PCB is; However, the cost will be higher correspondingly. Therefore, it is e

READ MORE

Are the electronics at risk of damage through static electricity?

2019-05-13

Yes! As we all know, static electricity tends to attract the dust, which will reduce the insulation resistance of components. In other words, static electricity can shorten the service life of components to some degree;

READ MORE

What is a dry or cold solder joint? How it can be eliminated?

2019-05-13

Cold solder joint means that there are a small quantity of tin column in the welding spot, which causes bad contactin the circuit.

READ MORE

Is baking a graphics card in my oven dangerous?

2019-05-10

Nope. You know, if a graphics card is damaged, the fault may be caused by cold solder joint of SMD components such as graphics card memory or core. In this case, with the help of high temperature treatment like baking in the oven, it will melt the solder

READ MORE

How can we identify the BGA area of PCB?

2019-05-10

BGA means Ball Grid Array, which is a special type of SMD chip package; So why is it called BGA? In fact, under the bottom of the package, all pins look like spherality and array as a grid pattern.

READ MORE

How can I store my electronic components?

2019-05-09

Well, electronic components must be stored in the clean, ventilated and non-corrosive gas warehouse; Meanwhile, unless otherwise specified, the temperature and relative humidity of the warehouse must also meet the following requirements:

READ MORE

Do stains on the solder points of a PCB mean that components are damaged?

2019-05-09

Not really. There are two possible reasons, such as the PCB isn't cleaned wellbefore welding or components are damaged.

READ MORE
Home About Us Services Quality Pb-Free News Contact Us


Copyright ® 2017,Shenzhen Grande Electronic Co., Ltd. All Rights Reserved. 中文站 Sitemap